Physics Lab Report

In this lab our throng was to find how the diversionary attack of the electron beam varies when passing through an electric field flop to the velocity of the electron beam. It seemed fairly conf hold at first, nonoperational as we started working on the equivalence, the ideas involved were easily understandable. The b arely confusing part was defining the equation that we should use to stigmatize the results. Equipment: 1 Cathode Ray Tube (with deflection plates and a map on the end) 1 military group tote up multiple connectors          Our group hooked up the cathode Ray Tube to the power supply with the connectors, and duty toured it on. The first time we did this it didnt work, so we check up on with the TA and found that we were supplying too many volts to the CRT. We were using 500V or else of 250V. We fixed this problem and a color propagate appeared on the screen at the end of the CRT. Because gravity and magnetized handle in the room were acting on the CRT, we had to turn it about to find a plane in which the green compass point lined up in the center of the graph. We utilise this as our point of origin. We then proceeded to measure the distance the dot traveled resulting from several different potentialitys applied to the deflection plates. The deflection plates used the voltage to make the electrons change their path. With more voltage the electrons were deflected a farther distance from origin.         I was unable to seminal fluid up with an equation that would produce the amount of total deflection. We worked on it for a while and our attempts proved inadequate. Our TA gave us the equation: tot Deflection = E L (D + L/2) 2 Vacc         These are your readings from the chart on the end of the CRT: Y          case (mm) ... If you want to get a full essay, enounce it on our website: OrderCustomPaper.com
If you want to get a full essay, visit our page: write my paper